1. Overview of reducer for ZLYJ extruder
The reducer for ZLYJ extruder is a gear transmission device with high precision hard tooth surface and thrust pack designed for plastic and rubber screw extruders.The product design refers to the technical specifications specified in cylindrical gear reducer (JB / T 8853-2001).Its characteristics have many similarities with ZLY cylindrical gear reducer , gear and shaft parts are made of high strength alloy steel.The gear is processed by carburizing, quenching and grinding.The accuracy of gear is grade 6 in GB 10095-88.Hardness of tooth surface HTC58 ~ 62.The front section of the hollow output shaft is equipped with a large size thrust bearing to bear the axial thrust when the screw is working.The whole machine has the characteristics of small volume, high bearing capacity, stable transmission, low noise and high efficiency.
2. Scope of application
①The speed of high-speed shaft is not more than 1500 rpm,
②The cylindrical speed of gear transmission shall not be greater than 20 m / s.
③The working environment temperature is - 40 ~ 45 ℃, if it is lower than 0 ℃, the lubricating oil should be preheated to above 0 ℃ before starting.
④The reducer for ZLYJ extruder can be used for both positive and negative operation. However, some high-speed shafts are equipped with single-phase oil pumps. The default direction is: facing the output shaft, the output shaft rotates clockwise. If the direction changes, please contact us before ordering.
|
|